NEWS
Aluminum and Magnesium alloy Die-Casting Parts
 
  • Aluminum and Magnesium alloy Die-Casting Shop Introduction
  • Over 10-year experience in die casting and total solution process makes us in the leading position on motivation, innovation and customer satisfaction.
    We got the certification of ISO-9002 in 1998, QS-9000 in 2001, and TS16949 in2007.
    The yield rate of our aluminum products and magnesium products is 90% and 60-70% respectively.
    Through utilizing CAD/CAE/CAS analysis, structural parts can be produced with thickness of 0.8 ~ 1.0mm and external parts with thickness of 1.0 ~ 1.2mm.
    To save the material cost, the magnesium scrap is recycled via our high efficiency device on site.
    Our tenet is to complete T1 in 45~50 days in order to ensure our customer to penetrate the market in time.
    CMC prides itself on the superb R&D capabilities, world-class service and leading processes in the industry.
       
     
  • Technology
  • project process
     
    img img
    emptyH/P injection
    Good filling & surface for thinner part by high pressure and high speed injection.
    Ultra-high speed Injection molding 超高速射出
    img img
     
    img img
    emptyVacuum
    Vacuum installation on cavity.
    vacoom method 真空法
    img img
     
    img img
    emptyGS process
    Before solidification , add pressure to reduce shrinkage risk, suitable for thicker wall parts, also can achieve better high pressure resistant.
    partial pressure 局部加壓法
    img img
     
    img img
    emptyGT process
    Using sudden burn to reduce cavity air to improve porosity risk.
    GT m 冷氣壓縮機
    img img
     
  • Equipment
  • img img
    Die-casting
    Type Cold chamber
    Ton 660
    Label BUHLER
    Meterial Aluminum、Magnesium
    Unmber 1
    img img
    img BUHLER 660T img
    img BUHLER 660 img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 650
    Label TOSHIBA
    Meterial Aluminum、Magnesium
    Unmber 1
    img img
    img TOSHIBA 650T img
    img TOSHIBA 650 img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 530
    Label BUHLER
    Meterial Aluminum、Magnesium
    Unmber 1
    img img
    img BUHLER 530T img
    img BUHLER 530 img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 350
    Label TOSHIBA
    Meterial Magnesium
    Unmber 2
    img img
    img TOSHIBA 350T img
    img TOSHIBA 350T img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 350
    Label TOSHIBA
    Meterial Aluminum
    Unmber 3
    img img
    img TOSHIBA 350T img
    img TOSHIBA 350T img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 135
    Label TOSHIBA
    Meterial Aluminum
    Unmber 2
    img img
    img TOSHIBA 135T img
    img TOSHIBA 135 img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 125
    Label TOYO
    Meterial Aluminum
    Unmber 1
    img img
    img TOYO 125T img
    img TOYO 125 img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 150
    Label 自威
    Meterial Aluminum
    Unmber 2
    img img
    img 自威 150T img
    img 自威 150 img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 85
    Label KDK
    Meterial Aluminum
    Unmber 1
    img img
    img KDK 85T img
    img KDK 85 img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 150
    Label TZE WEI
    Meterial Aluminum
    Unmber 2
    img img
    img TZE WEI 150T img
    img TZE WEI 150 img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 125
    Label TOYO
    Meterial Aluminum
    Unmber 1
    img img
    img TOYO 125T img
    img TOYO 125 img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 140
    Label YONGJI
    Meterial Aluminum
    Unmber 1
    img img
    img YONGJI 140T img
    img YONGJI 140T img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 350
    Label TOSHIBA
    Meterial Aluminum
    Unmber 4
    img img
    img TOSHIBA 350T img
    img TOSHIBA 350T img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 280
    Label YONGJI
    Meterial Aluminum
    Unmber 1
    img img
    img YONGJI 280T img
    img YONGJI 140T img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 85
    Label KDK
    Meterial Aluminum
    Unmber 1
    img img
    img KDK 85T img
    img KDK 85 img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 500
    Label YIZUMI
    Meterial Aluminum
    Unmber 1
    img img
    img YIZUMI 500T img
    img YIZUMI 500T img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 800
    Label LK
    Meterial Aluminum
    Unmber 1
    img img
    img LK 800T img
    img LK 800T img
    img img img
    img img
    Die-casting
    Type Hot chamber
    Ton 125
    Label FRECH
    Meterial Magnesium
    Unmber 1
    img img
    img FRECH 125T img
    img FRECH 125T img
    img img img
    img img
    Die-casting
    Type Hot chamber
    Ton 200
    Label FRECH
    Meterial Magnesium
    Unmber 1
    img img
    img FRECH 200T img
    img FRECH 200T img
    img img img
    img img
    Die-casting
    Type Hot chamber
    Ton 315
    Label FRECH
    Meterial Magnesium
    Unmber 1
    img img
    img FRECH 315T img
    img FRECH 315T img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 400
    Label LK
    Meterial Aluminum
    Unmber 1
    img img
    img LK 400T img
    img LK 400T img
    img img img
    img img
    Die-casting
    Type Cold chamber
    Ton 650
    Label TOSHIBA
    Meterial Magnesium
    Unmber 1
    img img
    img TOSHIBA 650T img
    img TOSHIBA 650T img
    img img img
    img img
    Tool maintenance
    Type ELECTRICAL DISCHARGE MACHINE
    Unmber 2
    Compare  
    Methods  
    img img
    img ELECTRICAL DISCHARGE MACHINE img
    img ELECTRICAL DISCHARGE MACHINE img
    img img img
    img img
    Tool maintenance
    Type 200T  Die Spotting Press Series
    Unmber 1
    Compare  
    Methods  
    img img
    img 200T  Die Spotting Press Series img
    img 200T  Die Spotting Press Series img
    img img img
    img img
    Machine center
    Name Vertical 5-axes CNC
    Label Mazak
    Unmber 1
    img img
    img Vertical 5-axes CNC img
    img 立式五軸加工機 5_axis_machining center img
    img img img
    img img
    Machine center
    Name Vertical 5-axes CNC
    Label Mori Seiki
    Unmber 1
    img img
    img Vertical 5-axes CNC img
    img 立式五軸加工機 5_axis_machining center img
    img img img
    img img
    Machine center
    Name Vertical 4-axes CNC
    Label Tong Tai
    Unmber 1
    img img
    img Vertical 4-axes CNC img
    img 立式四軸加工機 Machine center img
    img img img
    img img
    Machine center
    Name Vertical 4-axes CNC
    Label YCM
    Unmber 1
    img img
    img Vertical 4-axes CNC img
    img 立式四軸加工機 Machine center img
    img img img
    img img
    Tapping center
    Name CNC
    Label BROTHER
    Unmber 37
    img img
    img CNC img
    img BROTHER img
    img img img
    img img
    Tapping center
    Name CNC
    Label MORI SEIKI
    Unmber 6
    img img
    img CNC img
    img MORI SEIKI img
    img img img
    img img
    Tapping center
    Name CNC
    Label YCM
    Unmber 4
    img img
    img CNC img
    img 鑽孔攻牙機 Vertical_drill tapping brother img
    img img img
    img img
    Tapping center
    Name Drill and Tapping
    Label BROTHER
    Unmber 8
    img img
    img Drill and Tapping img
    img Drill and Tapping img
    img img img
    img img
    Lathe
    Name NC Lathe 8"
    Label Tong Tai
    Unmber 4
    img img
    img NC Lathe 8" img
    img NC Lathe 8" img
    img img img
    img img
    Lathe
    Name NC Lathe 6"
    Label Victor Taichung
    Unmber 2
    img img
    img NC Lathe 6" img
    img NC Lathe 6" img
    img img img
    img img
    Lathe
    Name NC Lathe 6"
    Label Mori Seiki
    Unmber 1
    img img
    img NC Lathe 6" img
    img NC Lathe 6" img
    img img img
    img img
    Surface treatment
    Name Chemical coating
    Unmber 2
    img img
    img Chemical coating img
    img Chemical coating img
    img img img
    img img
    Surface treatment
    Name Chemical coating
    Unmber 2
    img img
    img Chemical coating img
    img Chemical coating img
    img img img
    img img
    Surface treatment
    Name Chemical coating
    Unmber 2
    img img
    img Chemical coating img
    img Chemical coating img
    img img img
    img img
    Inspection lab instrument- X-Ray
    Name X-Ray
    Label Balteau
    Unmber 1
    img img
    img X-Ray img
    img Chemical coating img
    img img img
    img img
    Inspection lab instrument- X-Ray
    Name X-Ray
    Label Balteau
    Unmber 1
    img img
    img X-Ray img
    img Chemical coating img
    img img img
    img img
    Inspection lab instrument- Spectrometer
    Name Spectrometer
    Label Spectro
    Unmber 1
    img img
    img Spectrometer img
    img Chemical coating img
    img img img
    img img
    Inspection lab instrument- Material cost analysis
    Name Material cost analysis
    Label  
    Unmber 1
    img img
    img Material cost analysis img
    img Chemical coating img
    img img img
    img img
    Inspection lab instrument
    Name CMM
    Label Mitutoyo
    Unmber 1
    img img
    img CMM img
    img CMM img
    img img img
    img img
    Inspection lab instrument
    Name CMM
    Label Tokyo precision
    Unmber 1
    img img
    img CMM img
    img CMM img
    img img img
    img img
    Inspection lab instrument
    Name CMM
    Label Zeiss
    Unmber 1
    img img
    img CMM img
    img CMM img
    img img img
    img img
    Inspection lab instrument
    Name CMM
    Label Hexagon
    Unmber 1
    img img
    img CMM img
    img CMM img
    img img img
     
  • Aluminum and Magnesium alloy Die-Casting Shop Production
  •  
    img img
    emptyAutomotive parts
    Name Key Housing
    Character Made by Magnesium to achieve vibration reduction effect.
    Profile complex, critical positional accuracy.
    High technology die design.
    Methods 6 slides need, need good control die casting operation.
    Top-quality 6 faces need machining , so we invest 5-axis CNC machine to make sure true position.
    Key Housing
    img img
     
    img img
    emptyAutomotive parts
    Name Engine bracket
    Character Pull test must pass at least 55KN.
    Also meet after 49 kn high density done, deformation rate under 0.2%.
    Methods Full-automation equipment, die-casting to the finished product using a "flow" design, automatically detect deep dental equipment
    Top-quality Error prevention measures are in place, capacity is greater than other factory.
    Engine bracket
    img img
     
    img img
    emptyAutomotive parts
    Name Power steering pump
    Character There are stringent requirements of sand holes airtight.
    Resistant to high pressure 80kg or more.
    Methods Special GS engineering methods to prevent heat-shrinkable occur.
    Top-quality Well organized, can withstand high pressure.
    Power steering pump
    img img
     
    img img
    emptyAutomotive parts
    Name Power Steering pump
    Character Porosity control.
    High pressure resistant at least 120kg.
    Methods  
    Top-quality  
    Power Steering pump
    img img
     
    img img
    emptyAutomotive parts
    Name Engine components
    Character Must pass by high density resistant.
    Methods  
    Top-quality  
    Engine components
    img img
     
    img img
    emptyAutomotive parts
    Name A/C air compressor
    Character High density requirement to prevent Refrigerant leaking
    Methods  
    Top-quality  
    A/C air compressor
    img img
     
    img img
    emptyAir Valve components
    Name Air Valve components
    Character Valve Body and manifold base
    character: high density resistant, using special process to achieve good porosity control.
    Internal flash removed by special thermo de-burr machine
    Methods GT and vacuum both operations
    Top-quality Good control porosity
    Air Valve components
    img img
     
    img img
    emptyDIY tools
    Name Frame for Staple
    Character Made by magnesium ,lightweight & vibration resistant both. ,high density resistant
    Frame for Staple
    img img
     
    img img
    emptyDIY tools
    Name Frame and cap for Stapler
    Character Made by magnesium ,lightweight & vibration resistant both. ,high density resistant.
    Methods  
    Top-quality  
    Frame and cap for Stapler
    img img
     
    img img
    emptyOptical components
    Name Optical components
    Character Lens holder for digital camera
    Character: thinner wall , superior roundness ,porosity control.
    Methods GT operation
    Top-quality Achieve good porosity control .
    Optical components
    img img
     
    img img
    emptyBicycle components
    Name Outer leg for Suspension fork
    Character Thinner wall,cylindraceous shape.
    Special tool design to prevent deformation and good filling.
    Methods  
    Top-quality  
    Outer leg for Suspension fork
    img img
     
    img img
    Bicycle components
    Name Hydraulic brake components
    Character high density & high temperature resistant .
    Methods GT operation
    Top-quality Achieve good porosity control .
    Hydraulic brake components
    img img